Dell M8428-k Handbuch Zum Einstieg Seite 15

Backing up the configuration
Perform these steps to back up the switch module configuration to an FTP server.
1. Open a Telnet or SSH session to the switch module.
2. Enter the following command to upload the basic configuration of the switch module:
configUpload
You are then presented with a series of prompts.
3. Follow the prompts to upload the configuration.
4. When the upload completes, enter the following command to access the CEE CLI:
cmsh
5. Enter the following command to upload the current CEE configuration:
copy running-config ftp://[username@server/path]
You are then prompted for a password.
When you enter the password, the copy procedure begins.
These commands upload the switch module configurations to the server, making it available for downloading to a
replacement switch module if necessary.
Dell recommends backing up the configuration on a regular basis to ensure that a complete configuration is
available for downloading to a replacement switch module.
Dell M8428-k Getting Started Guide
MHWKY
Downloaded from www.Manualslib.com manuals search engine
13 of 160