Remote Control; Remote Control Functions; Using The Remote Control - ZENEC ZE-MR1502 Bedienungsanleitung

13. Do not drop or hit the LCD panel with hard objects, as it may cause permanent damage
to the unit. If you come into contact with any spilled LCD fluid, wash and clean affected
areas with plenty of water and soap and seek medical attention immediately.
14. Refer to authorized dealers or the distributor in your country, if you have any queries
about the product.

REMOTE CONTROL

REMOTE CONTROL FUNCTIONS

1. POWER
Press the POWER button to switch on/off the unit.
2. MODE
Select input signal A/V 1 or A/V 2 with MODE button.
3. MENU +/–
The button can be used for selecting menu option
(up/down choice).
4. ADJUST +/–
Under "MENU", it is for changing the system value.

USING THE REMOTE CONTROL

Aim the remote control directly at the unit.
Maximum IR distance is 3 meters from the IR-sensor.
Direct sunlight or very bright light reduces sensitivity to the IR-remote.
Obstruction between the IR-sensor and remote control may disrupt IR-signal
reception.
Downloaded from www.Manualslib.com manuals search engine
5
ZE-MR1502