Switching The Unit On/Off; Technical Data - Oase StreamMax Premium 2000 Gebrauchsanleitung

SWITCHING THE UNIT ON/OFF

N O T E
Prevent the pump from running dry. Otherwise the
pump will be destroyed.
· Only operate the pump when it is immersed.
· ® Operating instructions StreamMax Pump Con-
troller.
REMEDY OF FAULTS
Malfunction
Unit does not start up.
Water flow insufficient
Only submersed during installation

TECHNICAL DATA

StreamMax Premium
Rated voltage
Power consumption
Flow rate
Diameter of flow outlet
Length of the connection cable
Dimensions
Weight
SYMBOLS ON THE UNIT
Submersible to 1 m depth.
Protection class II, reliable electrical isolation from the mains by reinforced or double insulation.
For use indoors.
Do not dispose of with household waste.
Read and adhere to the instructions for use.
Cause
No supply voltage
Impeller unit blocked
Pump housing or impeller unit soiled
Impeller unit worn
Pump housing clogged
Minimum
Maximum
Length
Width
Height
CLEANING THE UNIT/REPLACING THE IM-
PELLER UNIT
Recommendation regarding cleaning:
· Clean the unit as required but at least twice a year.
· When cleaning the pump, pay particular attention
to the cleaning of the impeller unit and pump hous-
ing.
How to proceed:
5 H
· Dismantle the pump and clean all parts under run-
ning tap water, using a brush.
– Replace the impeller unit, if necessary.
· Reassemble the pump in the reverse order.
Remedy
Connect connection line with StreamMax
Pump Controller
Switch on StreamMax Pump Controller
Clean the unit
Clean the unit
Replace the impeller unit.
Clean the unit
2000
V AC 12
W 3.5
l/h 1200
l/h 2300
mm 37
m 3
mm 115
mm 60
mm 60
kg 0.4
- EN -
4000 5000
12 12
6 7.5
1800 2600
4000 5000
47 47
3 3
135 135
68 68
78 78
0.6 0.6
11