Technical Data - VOSS.farming easyCUT pro Bedienungsanleitung

Blades cut badly
Blades do not cut
If your problem is not listed here, or continues to exist, please feel free to contact our
customer service.

10. TECHNICAL DATA

Device type / Model
Supply voltage
Motor power
Strokes
Max. ambient temperature
Max. air humidity
Spare parts
Only spare parts expressly approved or offered by the manufacturer may be used.
If necessary, please contact your specialist dealer.
Attention:
Unauthorized modifications or alterations to the clipper are not permitted!
Disposal
The user is responsible for the proper disposal of the clipping blades and the clipping
machine at the end of their service lives. Observe the relevant regulations in your
country. Do not dispose of the clipper in household waste. Proper disposal preserves the
environment and prevents possible harmful effects. In accordance with the EU directives
2012/19/EU on disposal of electrical and electronic equipment, your device will be accep-
ted free of charge at municipal collection points or recycling centres, or you can take it
22
· blades are blunt
· blades are badly
sharpened
· blade tension too low
· blades have rust
· eccentric defective
· defective reduction
drive
· clipper head knocked
out
· have blades sharpened by a specialist
workshop
· have blades sharpened by a specialist
workshop
· increase tension by tightening the
tensioning nut
· have blades sharpened by a specialist
workshop or if too much rust replace
the blades
· have it replaced by a specialist
workshop
VOSS.farming „easyCUT pro"
Horse Clipper
230-240 V/AC
350 W
app. 2800 / min
0° - 40° C
10% - 90% (relative)