VOSS.farming easyCUT pro Bedienungsanleitung Seite 20

Cleaning the clipper head: The clipper head must also be cleaned regularly. First, remo-
ve the blades. Then loosen the two screws and remove the head from the drive. Now you
can thoroughly clean the head inside as well as all individual parts. If you reassemble it
afterwards, you should oil it again (lubrication is described in section 3).
20
Blade sharpening: Sharpening can only
be done on special machines and by speci-
alist dealers. Work only with sharp knives,
never with blunt or damaged knives.
Storage: The clipper must be kept well cle-
aned and oiled. Place the case out of the
reach of children and animals and in
a moisture-free environment. If there is
a suspicion of ingress of moisture, do
not use the machine any more. Bring them
for inspection as there is a risk of a short
circuit or electric shock.
x