Safety Instructions - VOSS.farming easyCUT pro Bedienungsanleitung

de en fr
1. CONTENTS
A hard shell carry case for transport and storage with:
- 1 x clipper
- 2 x set of blades, 1 mm & 3 mm, (3 mm preinstalled)
- 1 x bottle of special clipping machine oil
- 1 x universal wrench
- 1 x protective cover for blades
- 2 x spare carbon brushes
- 1 x cleaning brush
- 1 x manual

2. SAFETY INSTRUCTIONS

This section describes the mandatory safety regulations which must be observed when
using the clipper. Prior to using the product please read the operating instructions care-
fully and operate the product in accordance with the instructions so that the product can
serve you for a long time.
The operational safety and function of the device can only be guaranteed if both general
safety and state accident prevention regulations as well as the safety instructions in this
operating manual are observed. We accept no liability for damage resulting from impro-
per use or incorrect operation.
Please keep the operating instructions in a safe place so that you can consult them at any
time. In the event that the device is passed on, it is important to provide the operating
instructions so that the new owner is also aware of the safety instructions.
Notes on avoiding hazards and misuse
Only plug the clipper into a properly installed socket, otherwise it may result in a short
circuit or electric shock. The socket used should be equipped with a residual current
circuit breaker (RCCB).
Maintenance and cleaning may only be carried out when the plug is disconnected. Never
leave the machine unattended. Never use a damaged machine. If there is a defect, it may
only be repaired by authorised specialist technicians.
Operators of the clipper must have experience in handling the animals that are to be clip-
ped. Children must not operate the clipper, frail persons only under supervision. Use this
it nl sv es
15