Connecting To A Bodypack Transmitter - AKG MicroMic C 519 M Bedienungsanleitung

2.3.2 Connecting
the Microphone:
Fig. 2: Inserting the
16
Downloaded from www.Manualslib.com
2 Interfacing
• Use the supplied connecting cable to connect
to a Bodypack
Transmitter
Note: • You can attach the bodypack transmitter to your
Attaching the
1
Bodypack
Transmitter to
transmitter into
the adapter.
Refer to fig. 2. 1. Pull the ends of the fixing clip (1) out of the
2. Slide the transmitter (2) all the way into the
3. Reinsert the ends of the fixing clip (1) into the
manuals search engine
the output socket on the gooseneck to the in-
put socket on the bodypack transmitter.
belt or to the instrument. The PT 40 and PT 400
bodypack transmitters will also mount directly on
the microphone (refer to section 2.3.1 below).
2
adapter.
adapter.
openings in the adapter. The ends of the fixing
clip engage the locating holes in the transmit-
ter case to hold the transmitter in place.
3
AKG C 519 M / C 519 ML