2.3.2 Connecting
Bodypack Trans-
mitter to the Mi-
Fig. 2: Inserting the
transmitter into the
16
Downloaded from
www.Manualslib.com
2 Interfacing
• Use the supplied connecting cable to connect
to a Bodypack
Transmitter
Note:
• You can attach the bodypack transmitter to
Attaching the
1
crophone:
adapter.
Refer to fig. 2.
1. Pull the ends of the fixing clip (1) out of the
2. Slide the transmitter (2) all the way into the
3. Reinsert the ends of the fixing clip (1) into the
manuals search engine
the output socket on the gooseneck to the in-
put socket on the bodypack transmitter.
your belt or to the instrument. The PT 40 and
PT 400 bodypack transmitters will also mount
directly on the microphone (see below).
2
adapter.
adapter.
openings in the adapter. The ends of the fixing
clip engage the locating holes in the transmit-
ter case to hold the transmitter in place.
3
AKG C 518 M / C 518 ML