Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Controls
1
2 3
4
5
Inserting/replacing the batteries
B
A
• Slide the battery compartment cover on the underside of the cross-line laser to the outside
(A) and then fold it carefully on (B).
• Insert two AA batteries with the correct polarity (C). The positive pole is marked on the bat-
teries and the battery compartment correspondingly.
• Fold the battery compartment cover to (D) and slide it into the device (E) so that it clicks.
• A battery replacement is required when the light is faint or does not go on at all.
Operation
a) Using the tripod
The cross-line laser can be for e.g. fastened to the tripod included in the delivery via the tripod
socket (6) on the underside.
The height of the tripod can be adjusted. Align the mounting plate of the tripod horizontally with
the built-in level.
b) Using the automatic levelling system
• Place the cross-line laser on a horizontal and stable surface or mount it on a tripod.
• Move the sliding switch (1) to the position "ON".
• When the cross-laser is situated within the self-levelling range of ±4° to the horizontal, both
of the laser lines will be activated.
The LED indicator (4) turns red when the cross-line laser is outside the self-levelling
range, and the laser lines will flash.
The LED indicator (4) will light green to indicate that a laser is on.
• The levelling process is finished when the laser lines no longer moves. You can now, for
example, mark a horizontal and/or a vertical line on the wall in order to lay tiles, etc.
- Press the button
(2) to switch the vertical laser line on or off.
- Press the button
(3) to switch the horizontal laser line on or off.
• To end the operation, slide the slide switch (1) to the position "OFF". The lasers will be
deactivated and additionally the mechanics of the automatic levelling system inside the
cross-line laser will be fixed. The cross-line laser is now switched off.
c) Operation without the automatic levelling system
This can be used for example to project a diagonal line on the wall in order to mark
the positions of several pictures on the wall.
You can hold the cross-line laser in the hand or use the supplied tripod to fix the
cross-line laser in a diagonally inclined position.
• Move the sliding switch (1) to the position "OFF". The mechanics of the automatic levelling
system inside the cross-line laser will be fixed.
- Press the button
(2) to switch the vertical laser line on or off.
- Press the button
(3) to switch the horizontal laser line on or off.
The LED indicator (4) will light red to indicate that a laser is on.
When the automatic levelling system is switched off, the laser lines do not mark any
horizontal or vertical line because the mechanics inside the cross-line laser cannot
move freely and align itself!
If horizontal or vertical lines are to be marked, always use the automatic levelling
system!
1 Slide switch
2 Button
(vertical laser line)
3 Button
(horizontal laser line)
6
4 LED status indicator
5 Outlet opening for laser light
6 Tripod socket
7
7 Battery compartment cover
C
Maintenance and cleaning
• The product is maintenance-free for you; you should never dismantle it (except for inserting
or replacing the batteries as described in these operating instructions). Servicing or repair
may only be carried out by a specialist.
• Turn off the product before cleaning so that the laser lines do not light up.
• Use a clean, dry, soft cloth for cleaning. Do not use aggressive cleaning agents, as these
can cause discolouration. To prevent scratch marks, do not press too strongly on the sur-
face when cleaning.
• Dust can easily be removed using a clean, long-haired brush and a vacuum cleaner.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the house-
hold waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
D
Remove any inserted (rechargeable) batteries and dispose of them separately from
the product.
E
b) (Rechargeable) Batteries
You as the end user are required by law (Battery Ordinance) to return all used (re-
chargeable) batteries. Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labeled with this symbol to indicate that
disposal in the domestic waste is forbidden. The designations for the heavy metals
involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable)
batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our
stores or wherever (rechargeable) batteries are sold.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical Data
Power supply ................................ Battery: 2 x AA 1.5 V/DC (not included)
Operating life ................................ approx. 20 h (depending on the batteries being used)
Operational range ......................... approx. 8 m (depending on ambient light)
Automatic levelling accuracy ........ ±0.5 mm/m
Self-levelling range ....................... ±4°
Automatic levelling time ................ <4 s
Laser class ................................... 2
Laser output .................................. <1 mW
Laser wavelength ......................... 635 nm
Tripod ........................................... socket: 6.35 mm (1/4")
Operating conditions......................0 to 40 °C, 40 – <90 % RH (non condensing)
Storage conditions.........................0 to 40 °C, 40 – <90 % RH (non condensing)
Dimensions (L x W x H) ................ 74 x 51 x 81.5 mm
Weight .......................................... 170 g (without batteries)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE.
height: max 65 cm
*2141868_v3_1219_02_dh_m_en
Werbung
