Herunterladen Diese Seite drucken

ABC Design Zoom 7734 Bedienungsanleitung Seite 5

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
1. Opening the pushchair
Lift the front wheels upwards and outwards.
Then pull the bar-type handle up until the frame engages.
CAUTION: Ensure that all the catches are engaged before use.
2. Fitting the wheels
Press the button (1) and insert the rear wheel in the slot (2) until it
engages.
To remove the wheels, press the button (1) to release the wheels.
The wheels can then be removed from the axle.
Mount the front wheels by sliding the wheel assemblies onto the
prongs until they click into place.
To remove the wheel assemblies, press the button underneath the
blocks and remove the assemblies.
3. Wheel locking and swivel settings
Push the lever downwards to lock the wheels.
Push the lever upwards for swivel position.
4. Operating the brake
Press the lever down to engage the brake.
Press the lever up to disengage the brake.
NB: The brake must always be applied before lifting the children in
and out of the buggy.
EN - 07
1
1
1
1
2
2
2
2
3
4
5. Attaching and converting the seat
Attach the seat by placing it on the frame until it clicks into place.
To convert the seat, press the buttons on both adapters and lift up the
seat.
6. Attaching the hood
Fit the hood on the seat frame with the two plastic brackets.
7. Fitting and removing the guard rail
Fit the guard rail by inserting it in the plastic mounts on both sides.
To remove the guard rail from the pushchair, press in the buttons on
both sides and pull the guard rail off away from the pushchair.
8. Adjusting the leg rest
To adjust the leg rest, press in the buttons on both sides and then
adjust the height.
Let go of the buttons again so that the leg rest clicks into place.
9. Fastening the harness
To fasten the harness, bring the top two plastic catches together and
interlock them.
Then insert the interlocked catches into the bottom part of the
fastening.
Adjust the harness to a setting where the baby is held in the correct
position.
10. Unfastening the harness
To open the harness, press the button on the side.
CAUTION: Always use the shoulder harness and lap belt together.
5
5
6
7
7
8
9
9
10
EN - 08
loading