Maintenance - EINHELL ERGOTOOL E-SB 800E Gebrauchsanweisung

Anleitung E-SB 800 E SPK 7
GB
1. Scope of delivery pack-
age
E-SB 800 E,
Additional grip with bit stop
2. Use:
The drilling machine is designed for
drilling holes in wood, iron, nonfer-
rous metals and stone using the
corresponding drill bit.
3. Description
1 Quick-change drill chuck
2 Depth stop
3 Additional handle
4 Selector button: drill/hammer
5 Selector button:
clockwise/anticlockwise
6 Speed control
7 Locking button
8 On/Off switch
4. Safety regulations
The corresponding safety infor-
mation can be found in the enc-
losed booklet.
5. Technical data
Voltage: 230 V ~ 50 Hz
Power rating:
Drilling capacity Concrete 13 mm
Steel 13 mm
6
08.04.2004 8:19 Uhr
No Load Speed
Safety insulated
Sound pressure
level LPA
Sound power
level LWA
Vibration a w
Weight

6. Maintenance

Always keep the drill clean.
Do not use corroding agents for
cleaning plastic.
Check carbon brushes in the
case of excessive sparking.
Keep ventilation channels free.
7. Ordering replacement
parts
Please quote the following data
when ordering replacement parts:
Type of machine
Article number of the machine
Identification number of the
machine
Replacement part number of
the part required
800 W
Seite 6
Wood 32 mm
0 - 2800 min -1
II /
91 dB(A)
104 dB(A)
7,3 m/s 2
2,4 kg