INSTALLATIoN
Appliance handover
9.2
Pairing with the instantaneous water heater
A new wireless remote control is paired as follows:
1 Button for pairing and unpairing
2 Yellow LED illuminates when wireless remote control is
activated
f To start pairing the wireless remote control briefly press the
f
button. The yellow LED starts to flash. Press keys "1" and "2"
simultaneously on the wireless remote control and hold for
3 seconds Pairing takes place automatically and is acknowl-
edged when "L" is shown on the display. The yellow LED
flashes quickly several times in succession and then goes out.
f To unpair all wireless subscribers, press the button and hold
f
for 5 seconds.
www.stiebel-eltron.com
10. Appliance handover
f Explain the functions of the appliance to the user. Show the
f
user how to operate the appliance.
f Make the user aware of potential dangers, especially the risk
f
2
of scalding.
f Hand over these instructions.
f
1
FFB 4 EU | FFB 4 Set EU | FFB 4 AP | FFB 4 Set AP |
23