Before Use; Bringing Into Use; Attaching The Spray Tube - FLORABEST HG01665 Bedienungs- Und Sicherheitshinweise

Do not spray on people!
Do not spray on animals!
Spray on plants only!
Do not use the product for
drinks!
Do not leave the pressure spray-
ing device standing in the sun.
There is a risk of explosion!
Keep away from naked flames
and heat sources. Seal containers
securely. Store in a fireproof way!
Do not use easily flammable fluids!
Volume flow: 0.5 litres/min. at a
maximum of 2.5 bar!
Protect from frost and store away
from frost.
Store at 0°C – 40°C in a dry,
dust-free location.
When pumping, always watch
the manometer to check the
operating pressure.
Wear suitable protective coating,
glove or mask.
8 GB/IE/NI
Before using for the first time, pls
read the instruction carefully.

Before use

CAUTION! Check that the device is
functioning properly! Check the pressure
sprayer before each use to ensure that it
is free of visible damage and is func-
tioning safely. To do this, carry out the
following tests and inspections:
C heck the tank
5
and the carry strap
C heck that the hose connections are fitted
tightly.
C heck that the pipe connections are fitted
tightly.
P ump the empty pressure sprayer to
approx. 1 bar.
The pressure must not fall more than ap-
prox. 0.5 bar in a space of 30 minutes.
P ump the pressure sprayer to approx.
2 bar.
P ull the safety valve
You must be able to hear the pressure
escaping.

Bringing into use

Attaching the spray tube

(Fig. B)
T urn the union nut
release it from the handle
spray tube into the handle
8
far as it will go.
T ighten the union nut
clockwise.
, the suction hose
12
for visible damage.
6
up to the stop.
3
anticlockwise to
10
. Push the
11
as
11
by turning it
10