KESO Assa Abloy Integra Installations- Und Montageanleitungen Seite 31

Fig. 6:
Reading in a
reader
Configuration
Reading in a reader
1 Highlight the icon
2 Right-click to display the "Properties".
3 Click on the icon
 The "Configure device" window opens for each addressed reader.
4 Enter a name for each reader addressed and confirm with OK.
5 Select "Electronic devices only" from the selection.
 The read-in readers are listed.
6 Additional designations can be entered optionally.
7 Assign the permissions for the addressed readers.
8 Check the function.
of a door controller.
to have the reader read in.
31
EN