Maintenance - Life & Mobility vivo Bedienungsanleitung

G
Freewheel lever
Error message Indicator
10 blocks flash Too high voltage.
Contact your supplier.
Blocks run up and Throttle operated when
down from 1 to 10 switching on. Release
and back. the throttle, switch off
the mobility scooter
and switch it back on.
Contact your supplier if
the problem persists.
Freewheel lever
Warning:
ƒ Never use this function on a slope or while
driving. It will disable the brakes.
ƒ Always push the freewheel lever downwards
to re­engage the brakes after using the
freewheel function.
1. Push the freewheel lever (G) up to move the
mobility scooter by hand.
2. Push the freewheel lever down for the electric
drive position. Teach yourself to do this each
time you have used it.
Parking
When parking your scooter, place a chain lock
through one of the wheels for added security.
EN26

Maintenance

Cleaning
Be careful:
ƒ Do not use bleach or solvents.
ƒ Do not use a high­pressure cleaner to clean
the mobility scooter.
Attention:
Regularly clean the upholstery and the
ƒ
frame.
Upholstery
1. Remove any light dirt with a solution of a
mild cleaning agent and warm water.
2. Carefully scrub the upholstery with a soft
brush if the dirt has been absorbed into the
upholstery.
Frame
1. Clean the housing with a non­abrasive
cleaning product.
2. Apply non­abrasive car wax to the entire
frame.
Batteries (see also the chapter 'Use')
Attention:
ƒ Always fully charge batteries before using
them for the first time.
Be careful with damaged batteries. Leave
ƒ
(environmentally­friendly) replacement of
the batteries to your dealer.
Be careful:
ƒ Batteries can be dangerous. Only allow your
batteries to be installed and maintained by
a qualified scooter mechanic. They have the
required qualifications and tools to perform
the installation and maintenance safely and
correctly.
EN27