Control Panel; Starting The Device - dirna Bergstrom bycool green line compact 1.6 Benutzerhandbuch

COMPACT 1.6

Control panel

4
1.- On/off: turning the device on and off and selecting mode F4 / F0 / F1 / F2 / F6
2.- Temperature selector (15/27ºC - 59/80ºF), Programming the control and degrees
Fahrenheit and Air speed: Control of ambient temperature and speed of centrifugal
blower (between 1st and 5th speed) only manual mode.
3.- Display: Screen where the selected function and the device status are indicated.
4.- Led : On - indicates compressor in operation.
• On connecting, the device checks the LEDs and
Special display messages (please see Fault diagnosis):
Lb : " Low battery" (it will beep for a short period of time and the device will turn off).
E2 : Fault in condenser fan or centrifugal blower.
EO : Bad contact of the cables of the return air probe or faulty return air probe.
E6 : Bad contact of cables of anti-icing probe or faulty anti-icing probe.
E9 : Compressor protection (cabin down).

Starting the device

To start Compact 1.6 press the
(Automatic Function).
To change function, hold down the
shown on the display, release the button when the desired function appears.
ºC
+
3
ºF
TEMP
On/off
On/Off button. The different functions will be
9
2
-
- 1
appears on display and it turns off..
. The device always starts in F4 Function
EN
®
ON/OFF
1