Remote Control - dirna Bergstrom bycool green line compact 1.6 Benutzerhandbuch

COMPACT 1.6

Remote control

Remote control functions:
1
Device On/Off.
Note: By pressing this button the device is turned
on in automatic mode
2
Controlling centrifugal blower speeds.
Note: with the device on in automatic mode
F4
, if the user presses this key,
way, the user can choose the desired air flow by pressing this key, the following
will appear on the display
3
Temperature control.
The comfort temperature is controlled by pressing the keys
Register the remote control
To register the remote control, with the power off hold down the
C
panel will flash on the display. When it stops flashing, press the On/Off on the
control within 30 seconds and the device will beep in confirmation. If this does not
happen, repeat the entire operation.
Unregister the remote control
To unregister the remote control hold down the
, flashes on the display, when it stops flashing, press the
30 seconds or you will have to repeat the whole operation.
F4
the unit switches to manual mode
V1 V2 V3 V4
, , ,
11
1
2
V5 V4 V3 V2
, , , ,
-
+ (15/ 27 ºC - 59/80º F).
-
key on the control
key on the control panel until
+ key on the panel within
EN
®
3
0
This
V1
, .
C