dirna Bergstrom bycool green line compact 1.6 Benutzerhandbuch Seite 10

COMPACT 1.6
EN
Function F0 - Device Manual Operation
F0
Allows the user to select the comfort temperature and vary the speed of the device's
centrifugal blower.
The comfort temperature is controlled by briefly pressing the
(15/ 27 ºC - 59/80º F) or
The centrifugal blower speeds are controlled by holding down the
the Panel or the Control and the following will appear on the display
V5
.
Function F1 - Digital thermometer function
In this function Compact 1.6 indicates on its display the temperature inside the cabin.
Function F2 - Time programmer function
F2
programs the device for its automatic disconnection in a period between 1 and 9
hours. To program hold down the On/off button
the operating time with the
Function F4 - Device automatic operation
F4 CA
By selecting
(15/ 27 ºC - 59/80º F).
This function allows the device to automatically adjust its performance automatically
varying the blower and compressor speed.
Function F6 Selection ºF
To enable this function you must hold down the On/off
on the display, release the button and ºF will be activated directly. To return to ºC you
must hold down the
will flash on the display, when it stops flashing press the
When performing this operation the control is disabled so when you finish you must
register the control again.
on the control
-
keys and confirm by pressing
+
will appear on the display alternating with the selected temperature
-
key on the control panel with the device switched off,
.
until the display shows
10
-
+ keys on the panel
-
+
V1 V2
, ,
F2
On/off
F6
button until
key on the control panel.
+
®
keys on
V3 V4
, ,
, select
.
appears
C