Inhaltsverzeichnis; Plastic Pad Flex Wheel - Makita DGA405 Betriebsanleitung

2
3
4
5
100 mm (4") model
1
2
3 Inner flange 30
4
5 Lock nut 10-30
6 Plastic pad
7 Flex wheel
8 Rubber pad 76
9
10 Sanding lock nut 10-30
11
12
13
14
- Lock nut wrench 20
Note:
*1 Super flange needs only 1/3 of efforts to undo lock nut, compared with conventional type.
*2 Do not use Super flange and Ezynut together.
*3 In some European countries, when using a diamond wheel, the ordinary guard can be used instead of the special
guard covering the both side of the wheel. Follow the regulations in your country.
015100
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ from
country to country.
2 8
3 9
6 10
7
5
Wheel guard (for grinding wheel)
Depressed center wheel/Flap disc
Wheel guard (for cut-off wheel) *3
Abrasive cut-off wheel/Diamond wheel
1
2
11
115 mm (4-1/2") model
Grip 36
Inner flange 42
Super flange 47 *1
Lock nut 14-45
Ezy nut *2
Plastic pad
Flex wheel
Rubber pad 100
Abrasive disc
Sanding lock nut 14-48
Wire wheel brush
Wire cup brush
Lock nut wrench 35
Noise
The typical A-weighted noise level determined according
to EN60745:
Model DGA405, DGA455
Sound pressure level (L
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 80 dB (A).
13
12
3
14
5
125 mm (5") model
Inner flange 42
Super flange 47 *1
Lock nut 14-45
Ezy nut *2
Plastic pad
Flex wheel
Rubber pad 115
Sanding lock nut 14-48
Lock nut wrench 35
): 80 dB (A)
pA
ENG905-1
13