Switching The Appliance On And Off - Philips OneBlade QP2520 Bedienungsanleitung

12
English

Switching the appliance on and off

Shaving
edging or trimming hairs on lower body parts or
scalp hair. Take your time when you first start to
use the appliance. You have to acquire practice
with the appliance.
Note: This appliance can only be used without
cord.
1 To switch on the appliance, press the on/off
button once.
2 To switch off the appliance, press the on/off
button once.
Warning: Before you use the appliance,
always check the blade for damage or wear.
If the blade is damaged or worn, do not use
the appliance, as injury may occur. Replace
a damaged blade before you use the
appliance (see chapter 'Replacement').
Shaving
- Make sure that the blade is in full contact with
the skin by placing it flat on the skin.
- For the best result, move the appliance against
the grain.
- Make long strokes while pressing lightly.
- You can use the appliance dry or wet with gel or
foam. You can even use the appliance in the
shower.