Troubleshooting - AEG CTV 4894 Bedienungsanleitung

Troubleshooting

Before sending the machine to the Customer Services, use the following table to check whether you can rectify the fault
yourself.
Fault
The power supply
light does not light
No image displayed
on screen
No response when
pressing button
No sound
The remote control
does not work
Titles are played in
wrong order
DVD cannot be
played
05-CTV 4894_GB.indd 73 05-CTV 48 _GB.indd 73
Possible cause
No power supply
no power supply/ mains switch
switched off
During operation with a
television set:
Video cable not correctly
connected
no DVD/CD inserted
DVD/CD not compatible
DVD/CD incorrectly placed in
CD/DVD-tray
CD/DVD is dirty
CD/DVD is damaged
Incorrect settings
The child protection system is
activated
The AV IN/OUT switch (Fig.
2/14) is turned to „IN".
Power supply problem or static
charging of appliance
During operation with a
television set:
Audio cable not connected
Volume turned to low
Headphones not correctly
inserted
Amplifi er switched off
Incorrect settings
Wrong direction
Too far away
Batterie empty
Playlist is used
DVD has not been fi nalized
Solution
WARNING:
Before searching for the fault, please turn the device off .
During battery operation: check whether the battery is
r
cha ged.
During mains adapter operation: Put the mains plug in
correctly, if necessary, check the socket is working with
another appliance.
Switch the player on by the mains switch (Fig. 2/20).
WARNING:
Before searching for the fault, please turn the device off .
Check the correct fi t of the Video cable. Make sure that the
jacks are tightly in the sockets.
Insert a CD/DVD.
Use only compatible media.
Turn the CD/DVD around.
Clean the CD/DVD around.
Use a diff erent CD/DVD.
Check the settings of your DVD-Player.
Deactivate the child protection.
Turn the AV IN/OUT switch to „OUT".
Switch off the main switch and pull out the mains plug. Insert
the mains plug into the socket and switch the player on again.
WARNING:
Before searching for the fault, please turn the device off .
Check the correct fi t of the Audio cable. Make sure that the
jacks are tightly in the sockets.
Increase the volume by pressing the VOL + ( ) buttons
(Fig. 1/7 / Fig. 3/8).
Check that the headphones are correctly positioned.
If you use an amplifi er for Audio output: check whether the
amplifi er is switched on.
Check the settings of your DVD-Player.
The remote control is not pointed towards the DVD-Player.
Make sure that the remote control is not further than 5 m
away from the player.
Replace the batteries in the remote control.
Delete the playlist.
Use a fi nalized DVD.
English
73
20.03.2008 12:01:18 Uhr 20.03.2008 12:01:18 Uhr