AEG CTV 4894 Bedienungsanleitung Seite 68

English
68
05-CTV 4894_GB.indd 68 05-CTV 48 _GB.indd 68
Age lock
Here you can select the age of the child lock or deactivate the setting.
If you have activated the child lock option, the corresponding information
is compared with the age set by you (if such information is transmitted by
the respective station). If a programme is intended for an older age group
than the age you have set, the programme cannot be shown.
NOTE:
You are asked to put in the password. This is identical to the one you
entered in the menu „Password Setup Page/Password".
Channel Setting
Automatic Scan
Select this type of scan to search for channels through the entire recepti-
on frequency range of the receiver.
1. Select the „Start" command.
2. Confi rm the confi rmation prompt shown with the ENTER button
(Fig.3/7).
The channel search is now performed automatically and may take several
minutes.
NOTE:
If you would like to interrupt the procedure, press the PBC/SCAN
(Fig. 3/19) button and acknowledge the confi rmation prompt with
the ENTER button (Fig. 3/7).
By pressing the PBC/SCAN button (Fig. 3/19) you can also activate
the automatic channel search.
Manual Scan
NOTE:
In this type of search it is necessary to know the frequency of the chan-
nel you are searching for. This can be obtained either on the Internet or
directly from the respective channel provider.
Select this type of scan in order to specifi cally search a certain channel or
a certain frequency for programmes.
1. Select the „Start" command.
2. Confi rm the confi rmation prompt shown with the ENTER button
(Fig. 3/7).
3. The manual search window opens. Use the numerical buttons (Fig.
3/3) to enter the desired frequency and select the „SCAN" command.
In the frequency range that has been entered a search is carried out
for channels that can be received.
NOTE:
If you would like to interrupt the procedure, press the PBC/SCAN
button (Fig. 3/19).
20.03.2008 12:01:17 Uhr 20.03.2008 12:01:17 Uhr