Using A Memory Card - AEG CTV 4894 Bedienungsanleitung

English
60

Using a memory card

Using a USB medium
05-CTV 4894_GB.indd 60 05-CTV 48 _GB.indd 60
The following memory cards can be used:
SD-Card
Multi Media Card
Memory-Stick
1. Insert the memory card into the card reader (Fig. 2/21).
2. Press the SOURCE button (Fig. 3/14) on the remote control in order to
turn the DVD player to the fi le mode.
3. Select the desired fi le(s) und start playback ➯ Page 61, „Selecting a
fi le/directory and starting playback".
4. If you would like to change back to DVD mode, press the SOURCE
button (Fig. 3/14) repeatedly.
NOTE:
In order to fi nd out which fi les can be played back the DVD player
now reads the contents of the storage medium. In the case of
large storage media this procedure may take a long time. During
this time you will see the words „WAITING" on the screen.
If you have connected an output device to the USB socket its
content is displayed fi rst. Press the SOURCE (Fig. 3/14) button a
second time to display the contents of the memory card.
By means of the USB connection it is possible to connect various USB sto-
rage media to the DVD player. Examples of such devices are USB memory
sticks or digital cameras.
This device has been developed in accordance with the latest techni-
cal developments in the USB fi eld. Unfortunately the large number of
diff erent types of USB storage media on off er today makes it impossible
to guarantee full compatibility with all USB storage media. For this reason
there may be problems in rare cases with playing back from USB storage
media. This is not a malfunction of the device.
1. Press the SOURCE button (Fig. 3/14) on the remote control in order to
switch the DVD player to the fi le mode.
2. Insert a USB storage medium into the corresponding connection of
the DVD player (Fig. 2/22).
NOTE:
In order to fi nd out which fi les can be played back the DVD player
now reads the contents of the storage medium. In the case of
large storage media this procedure may take a long time. During
this time you will see the words „WAITING" on the screen.
3. Select the desired fi le(s) and start playback ➯ Page 61, „Selecting a
fi le/directory and starting playback".
4. If you would like to change back to DVD mode, press the SOURCE
button (Fig. 3/14) repeatedly.
5. Then remove the USB storage medium.
20.03.2008 12:01:12 Uhr 20.03.2008 12:01:12 Uhr