Trouble Shooting Tips; Troubleshooting & Tips - AEG CTV 4849 Bedienungsanleitung

19" TFT LCD TV CTV 4849 LCD

TROUBLE SHOOTING TIPS

9 Trouble shooting tips
44
Before calling for service, you can check the following items on
symptoms and solutions.
TV mode
No picture
Check other channel, maybe station problem.
Adjust the tuning control.
Ensure that the input setting is at TV state.
Ensure that the LCD is on.
Ensure that the equipment is connected properly.
No sound and distorted sound
Ensure that the input settings for the TV and sound are proper.
Adjust the tuning control.
Probably local interference, such as an appliance.
Re-orient aerial (if indoor type).
Ensure that the equipment is connected properly.
No remote Control
Check the battery are installed with the correct polarity.
Point the remote control unit at the remote control sensor and
operate.
Remove the obstacles between the remote control and the
remote control sensor.
Operate the remote control unit at a distance of not more than 8
meters from the remote control sensor.
PC mode
NO SYNC SIGNAL or POWER SAVE displayed
Check if the wire is connected correctly.
Ensure the computer or other equipments are at power on
mode.
Ensure the computer is not at power save mode.
Ensure the TV input setting is at pc mode.
Invalid Scan Fred displayed
Check if the input setting is compatible to the monitor
specification.
Check if the wire is connected correctly.