Prefader Listening To The Channels; Announcements Via The Dj Microphone; Mp3 Player; Playing Mp3 Files - Omnitronic PM-311P Bedienungsanleitung

6.4 Prefader listening to the channels

The cue function allows monitoring each of the channels 1-3 via headphones even if the corresponding
channel is faded out. Thus, it is possible, e. g. to time the moment for fading in an audio source. Alternatively
it is possible to monitor the current music program ahead of the master control.
For prefader listening to a channel, press the corresponding selector switch CUE (red LED lights) and
1
turn the control CUE MIXING to the left stop position CUE. To monitor the current music program ahead
of the master control, turn the control CUE MIXING to the right stop position PGM.
Adjust the desired headphones volume with the control CUE LEVEL.
2

6.5 Announcements via the DJ microphone

Adjust the volume of the microphone announcement with the control MIC LEVEL.
1
Adjust the desired sound with the tone controls. By adjusting the controls, the high frequencies (control
2
HIGH) and the low frequencies (control LOW) can be boosted or attenuated within a range of ±12 dB.
To improve the audibility of an announcement during the current music program, press the button
3
TALKOVER (red LED lights) to activate the talkover function. Then during a microphone
announcement, the levels of channels 1-3 are automatically attenuated by 20 dB.

6.6 Playing MP3 files

Insert a USB device into the USB port. After loading a device, it is selected as the playback medium
1
and read in. Press the button [►II] to start the playback of the first title. To interrupt the playback, press
the button [►II] once again.
Adjust the desired volume for the MP3 player with the level control USB LEVEL.
2
With the buttons [] and [], you can skip titles in forward or backward direction and start fast forward
3
and reverse:
• short actuation of the button []
• short actuation of the button []: skip to the previous title
• long actuation of the button []
• long actuation of the button []: fast reverse
To remove a USB device, disconnect it from the USB port. Prior to removing a device, always terminate
4
the playback with the button [►II]. Otherwise damage or loss of data may occur.
Regarding USB devices
• This unit supports USB devices with the file system FAT32 and with a capacity up to 32 GB.
• This unit does not recognize folders. All MP3 files must be stored in the root directory of the memory.
The files will be played in alphabetical order.
• The MP3 player features an auto repeat function, i. e. all titles of the data carrier are continuously
played.
• This unit supports MSC (Mass Storage Class) USB storage devices 1.0, 1.1, 2.0 including external
portable flash memory devices and digital audio players. However, hard discs, optical discs such as
external CD/DVD drives will not be recognized. Depending on the device used, proper playback may
not be possible with all USB devices.
• If a USB device is not recognized at the first try, remove it and insert it again.
:
skip to the next title
:
fast forward
19/20 00072956.DOC, Version 1.0