The Remote Control Keys - Philips 37PF5520D Bedienungsanleitung

The remote control keys

Mode selector
To activate the remote control in
TV, DVD or AUX mode (see p 4).
AUX/DVD key (see p. 4).
TV menu
To display or edit from the analogue
Analogue or Digital mode
To switch the television between
analogue and digital mode.
Volume
To adjust the sound level.
Screen information
In digital mode, press once to display
nd
the information banner, 2
get more information on
the programme and a 3 rd
remove it (see p. 5).
In analogue mode, this displays/
removes the programme
informations (number, name, sound
mode). Hold down for 5 seconds to
permanently display the analogue
programme number on the screen.
Sound mode
To switch from Stero to Mono or to
choose between different languages
(Dual I, Dual II,..).
When the sound mode is switched to
Mono, the indication is displayed in red.
Subtitle mode
To activate/deactivate the subtitle
mode (when TV is in digital mode).
Screen format (see p. 14)
or teletext key (see p15).
Select EXT sockets (see p. 18)
or teletext key (see p15).
Surround sound
To activate/deactivate the Virtual
Dolby Surround* effect. In stereo,
you can obtain Dolby Surround Pro
Logic sound quality. In mono, a
stereo spatial effect is simulated.
* Manufactured under licence from Dolby
Laboratories. "Dolby" "Pro Logic" and the
double-D symbol are trademarks of Dolby
Laboratories
Picture and sound settings
Accesses a series of picture
and sound settings.
The position Personal coresponds to
the settings stored in the menus.
Cancel
menus.
time to
time to
.
Standby
To set the TV to standby mode.To
switch the TV set on again, press
+ –
, P or .
Options menu (see p. 10).
Teletext features (see p. 15) and
AUX/DVD keys (p. 4).
Digital menu
To display or exit from the digital
menus (when TV is in digital mode).
Cursor
These 4 keys are used to move within
the menu or to directly access the
screen formats.
OK
Confirms selection. Also access
program list in Analogue or Digital
mode.
TV guide (see p. 10).
Mute
To disable or enable the sound.
Programme selection
To access the next or previous
programme (or page in digital menus).
Numerical keys
For direct access to programmes. For
a 2 (3) digit programme number, the
second (third) digit must be entered
before the dash disappears. The
number, the name (and the sound
mode, in analogue mode) are displayed
for a few seconds.
Previous programme
To access the previously viewed
programme. In Digital mode, it also
used as an edit or back space key.
Teletext feature (see p. 15)
PIP on/off
Display PIP screen on TV. Subsequent
presses of the key changes size of the
window. For display of PIP screen in
PC or HD mode, see p. 18.
Pixel + (depending on version)
Switches the Pixel + demonstration
mode on or off.
Active control
Optimises the picture quality
depending on the quality of the
incoming signal and ambient light
conditions.
Unused key.
3