Connecting Peripheral Equipment; Videorecorder - Philips 37PF5520D Bedienungsanleitung

Connecting peripheral equipment

The television has 2 external sockets situated at the back of the set (EXT1 and EXT2) and sockets on
the side. Press the AV key on the remote control to display Source List and select TV or peripheral
equipment connected to EXT1, EXT2/SVHS2, AV/SVHS3, PC or HD.
The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.
The EXT2 socket has audio, CVBS/S-VHS inputs and audio, CVBS outputs.
The side connections has audio inputs, CVBS/S-VHS inputs, headphone out.
Video Recorder
EXT. 2
HD equipment
DVI
DVI-I
AUDIO
(HD/PC)
IN
Computer
DVI-I DVI
(HD/PC) AUDIO IN
DVI-I
DVI
(HD/PC)
AUDIO IN
18
Video recorder (only)
Carry out the connections shown opposite, using
a good quality euroconnector cable.
If your video recorder does not have a euroconnector
socket, the only connection possible is via the aerial
cable.You will therefore need to tune in your video
recorder's test signal and assign it programme number 0
(refer to manual store, p. 12).
To reproduce the video recorder picture, press 0 key.
Video recorder with decoder
Connect the decoder to the second euroconnector
socket of the video recorder.You will then be able to
record scrambled transmissions.
Make the connections as shown opposite.
With the AV key, select HD.
For more information on using HD mode see page 17.
PC with DVI
Connect the monitor output (DVI) of your computer
to the DVI-I In of the TV. Connect the sound output
Audio out of the computer to the input DVI Audio In
of the TV.
Digital
PC
PC with VGA
Connect the monitor output (VGA) of your
computer via a VGA/DVI adaptor to the DVI In of the
TV. Connect the sound output Audio out of the
computer to the input DVI Audio In of the TV.
For more information on using PC mode see page 16.