Remote Control Keys - Philips 29PT8640 Bedienungsanleitung

Remote control keys

Standby
To set the TV to standby mode.
To switch the TV set on again,
b @ #
press , P or
Select peripherals (p.10)
Press several times to select the
required EXT connector.
List of programmes
To display/clear the list of
<>
programmes. Use the
select a programme and the
cursor to display it.
+
The symbol is displayed alongside
all programmes which are locked (p.7).
NEX
refer to the separate booklet (only
available on certain models).
These 4 keys are used to move
<>≤≥
around the menus (
Freeze the picture
To mute or restore the sound.
To adjust the sound level.
Screen information
To display / remove the programme
number, the name (if it exists), the
time, the sound mode and the time
remaining on the timer. Hold down
for 5 seconds to permanently display
the programme number on the
screen.The volume level and the
smart control adjustments are then
displayed each time they are used.
Active Control (according to the version)
Optimizes the quality of the picture
according to the quality of reception.
Dual screen (according to the version)
To activate/disable the display on
2 screens. The second screen
displays teletext.
* Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbols are trademarks of Dolby Laboratories.
0 9
.
VCR DVD SAT AMP CD
cursor to
≥
Ÿ
Y
·
TV :
IEW
Œ
Cursor
).
Mute
Volume
"
1
4
7
Ë
ACTIVE
SMART CONTROL
-
†
Select
Ê
¢ Æ
œ π ‡
OK
MENU
[
P
2 3
5 6
8 9
0
ù
` K
SMART
ª
Surround Sound
To activate / deactivate the surround
sound effect. In stereo, this gives the
impression that the speakers are
further apart. For models equipped
with Virtual Dolby Surround*, you
can experience Dolby Surround Pro
Logic sound effects.
Mode selector (p. 11)
To activate the remote control in TV,
VCR, DVD, SAT,AMP or CD mode.
Teletext keys (p. 8),
PIP (p.9) or VCR / DVD (p.11).
Teletext (p. 8).
Audio and video equipment key (p.11)
Menu
To call up or exit the menus.
Programme selection
To access the next or previous TV
channel from the list of Favourite
Programmes (see p. 5).
Digit keys
Direct access to the programmes.
For a 2 digit programme, enter the
2nd digit before the dash
disappears.
Sound mode
Used to force programmes in
and to
Stereo Nicam Stereo
or, for bilingual programmes, to
choose between or
Dual I Dual II
The indication is red when in
Mono
forced position.
Sleeptimer
To select the length of time before the
set automatically switches to standby
(from 0 to 240 minutes).
Screen Format (p. 9).
Smart picture and sound
Used to access a series of predefined
picture and sound settings.
The position relates to
personal
settings selected from the menus.
Mono
.
3