Remote Control Keys - Philips 17PF8946 Bedienungsanleitung

Remote control keys

Press one of these keys to switch
the television between TV, PC or
programmes. Use the keys
select a programme and the key
Press several times to select the
recorder) carries out the switching
To select the length of time before
the set automatically switches to
standby (from 0 to 240 minutes)
These 4 keys are used to move
To mute or restore the sound.
To display / remove the programme
number, the time, the sound mode
and the time remaining on the timer.
permanently display the programme
4
Downloaded from www.Manualslib.com
TV / PC / Radio (p. 10)
radio mode.
List of programmes
To display / clear the list of
îÏ
to
¬
to
display it.
Select peripherals (p.2)
required EXT connector.
Most equipment (decoder, video
itself.
Sleeptimer
Menu
To call up or exit the menus.
Cursor
around the menus.
Volume
To adjust the sound level
Mute
Screen information
Hold down for 5 seconds to
number on the screen.
Insert the two R6-type batteries supplied, making sure they are the right way
round.
The batteries supplied with the appliance do not contain mercury or nickel cadmium
so as to protect the environment. Please do not discard your used batteries, but use
the recycling methods available (consult your distributor).
manuals search engine
.
RADIO
` ù
Y
ı
SMART SMART
-
ª
¤
MENU
+ +
"
[
P
- -
1 2 3
4 5 6
7 8 9
Á
Ë 0
Standby
To set the TV to standby mode.To
switch the TV set on again, press
b @ # 0 9
, P or .
Surround Sound
To activate / deactivate the surround
sound effect. For models equipped
with Virtual Dolby Surround*, you
can experience Dolby Surround Pro
Logic sound effects.
Sound mode
Used to force programmes in
and to
Stereo Nicam Stereo Mono
or, for bilingual programmes, to
choose between or
Dual I Dual II
The indication is red when in
Mono
forced position.
16:9 Format (p. 9)
Smart picture and sound
Used to access a series of
predefined picture and sound
settings.
The position relates to
personal
settings selected from the menus.
Teletext (p. 8)
Selecting TV programmes
To move up or down a programme.
The number and the sound mode are
displayed for a few seconds.
For some TV programmes the title of
the programme appears at the
bottom of the screen.
Numerical keys
For direct access to programmes.
For a 2 digit programme number,
the 2 digit must be entered
nd
before the dash disappears.
Previous programme
To access the previously viewed
programme.
* Manufactured under license from
Dolby Laboratories."Dolby" and the
double-D symbols are trademarks
of Dolby Laboratories.
.