Connecting Peripheral Equipment; Video Recorder; Other Equipment; To Select Connected Equipment - Philips 23MW901037B Bedienungsanleitung

Connecting peripheral equipment

DC in

Video recorder

Other equipment

14
Downloaded from www.Manualslib.com
Depending on the version the TV is equipped with one or two EXT1 and EXT2 sockets.
A special adaptor is supplied to connect to EXT1 and can route the leads to the back.
The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.
The EXT2 socket (if available) has audio, CVBS/S-VHS inputs and audio, CVBS outputs.
:
L
Audio in
(PC)
PC input
R
:
FM ANT
VCR
Sub
woofer
out
*
L R
Audio
out

To select connected equipment

.
ı
MODE
Press the
VCR
Z
∫
DVD
· ¢ Ê Æ
EXT2
Ω ∆
Most equipment (decoder, video recorder) carries out the switching itself.
Ó ¤
manuals search engine
FM ANT
EXT 1
Video recorder (or DVD recorder)
Carry out the connections shown opposite, using a good
quality euroconnector cable. If your video recorder has the
Easylink function, use the EXT2 socket.
If your video recorder does not have a euroconnector socket, the
only connection possible is via the aerial cable.You will therefore
need to tune in your video recorder's test signal and assign it
programme number 0 (refer to manual store, p. 6).
To reproduce the video recorder picture, press
Video recorder with decoder
Connect the decoder to the second euroconnector socket of
the video recorder.You will then be able to record scrambled
transmissions.
Satellite receiver, decoder, DVD, games, etc.
For TV sets with 2 SCART connectors, preferably connect the
equipment delivering RGB signals (digital decoders, DVD
players, games consoles, etc.) to EXT1 and the equipment
delivering S-VHS signals (S-VHS and Hi-8 VCRs) to EXT2.
n
key to select
EXT1
, (S-VHS signals from the EXT2 socket) and
S-VHS2
Sub
woofer
out
*
EXT 2 *
L
R
Audio
out
0
.
and on the versions with 2 scarts,
EXT3
.