Initial Commissioning; Connecting Special Tool To The Hydraulic Hand Pump - walterscheid SW40 Bedienungsanleitung

INITIAL COMMISSIONING

5 Initial Commissioning
The special tool is only permitted to be operated by the hydraulic hand pump supplied by us or using
the pneumatically driven hydraulic unit supplied by us.
The special tool is prepared as standard for the direct connection to the hydraulic hand pump. The
special tool can also optionally be connected to the pneumatically driven hydraulic unit.
5.1

Connecting special tool to the hydraulic hand pump

Fig. 8
1. Secure the special tool (1) against moving on a stable worktop.
2. Connect the hydraulic hose lines (2) and (3) to the connections (4) and (5) of the hydraulic hand
pump.
The special tool is ready for use.
®
Check the oil level of the hydraulic hand pump or the hydraulic unit. If
required, fill with hydraulic oil HLP 46.
Ensure that the hydraulic connectors engage in the hydraulic sleeves.
31