Boost Function; Function Indicator; Storage; Maintenance - Kobold VC100 Gebrauchsanleitung

Function indicator (7)

Off
On
Flashes briefly
Pulsates
Flashes quickly
5
2
2
5a
26

6.3 Boost function

1. Hold down the green button (8) to activate the boost function.
2. Release the green button (8) to return to normal mode.
6.4 Function indicator
Status
Off or finished charging
Normal operation or boost function
Please recharge
Charging in progress
Fault

6.5 Storage

The handheld vacuum cleaner can remain in the charging unit.
Note If you are not going to use the handheld vacuum cleaner for a long
period of time, unplug the mains charger from the power socket.
7

Maintenance

7.1

Cleaning the filter

1. Press the release key (2) and remove the dust chamber from the
device.
1
2. Hold the dust chamber with the nozzle pointing downwards.
3. Press the release key (2) again and remove the filter unit (5) from
the dust chamber.
2
4. Empty the contents of the dust chamber (1) into a bin.
5. If necessary, clean the dust chamber with a damp cloth and
1
allow the dust chamber to dry completely before reassembling.
6. When inserting the filter unit (5), make sure that the indentation
(5a) on the rim of the filter unit is aligned with the release key (2)
on the dust chamber (1).
1
7. Hold down the release key and push the filter unit into the dust
chamber as far as it will go.
5