Manual Adjustment; Electronic Adjustment - AEG FAVORIT 55000 Benutzerinformation

German degrees
(°dH)
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water softener manually and electronically.

Manual adjustment

Turn the water hardness dial to the position 1 or 2
(refer to the table).

Electronic adjustment

1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold function buttons B and C until the indicator lights of function buttons
A, B and C start to flash.
4. Release function buttons B and C.
5. Press function button A.
– The indicator lights for function buttons B and C go off.
– The indicator light for function button A continues to flash.
– The display shows the current adjustment.
Example: the display shows
6. Press the function button A again and again until the display shows the necessary ad-
justment.
7. Press the on/off button to keep the operation.
If the water softener is set electronically to the level 1, the salt indicator light stays off.
Water hardness
French degrees
(TH°)
7 - 18
< 7
= level 5.
Setting the water softener
mmol/l Clarke de-
grees
0,7 - 1,8 5 - 12
< 0,7 < 5
11
Water hardness ad-
justment
manually elec-
tronical-
ly
1 2
2) 2)
1 1