Specifications; Da: Installations Vejledning - Interlogix ATS1811 Installationsanleitung

Wiring
Table 2: Interconnection between the relay card and the different
ATS equipment
ATS1811 relay card Name
IN (item 3)
1 +12 V
2 Data
4 Latch
5 Clk
10 0 V
Table 3: Interconnection between two ATS1811 relay cards
ATS1811 relay card Name
OUT (item 1)
1 +12 V
2 Data
4 Latch
5 Clk
10 0 V

Specifications

Supply voltage
Current:
Standby
Maximum (all relays active)
Contact rating:
Current, max.
Voltage, max.
Dimensions
Weight
Operating temperature
Relative humidity
Regulatory information
Manufacturer PLACED ON THE MARKET BY:
UTC Fire & Security Americas Corporation, Inc.
3211 Progress Drive, Lincolnton, NC, 28092, USA
AUTHORIZED EU REPRESENTATIVE:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
Product warnings THESE PRODUCTS ARE INTENDED FOR SALE
and disclaimers TO AND INSTALLATION BY QUALIFIED
PROFESSIONALS. UTC FIRE & SECURITY
CANNOT PROVIDE ANY ASSURANCE THAT
ANY PERSON OR ENTITY BUYING ITS
PRODUCTS, INCLUDING ANY "AUTHORIZED
DEALER" OR "AUTHORIZED RESELLER", IS
PROPERLY TRAINED OR EXPERIENCED TO
CORRECTLY INSTALL FIRE AND SECURITY
RELATED PRODUCTS.
For more information on warranty disclaimers and
product safety information, please check
https://firesecurityproducts.com/policy/product-
warning/
Certification
2 / 18
ATS Master (J8), ATS1250 / 1260
(J21), ATS1201 (J8)
1
2
4
5
10
ATS1811 relay card IN (item 3)
1
2
4
5
10
10.5 to 13.8 V (12 V
50 mA
250 mA
1A at 0 to 30 V
300 mA at 48 V
176 × 52 mm (size "BB" board)
253 g
−10 to +55°C
< 95% noncondensing
or scan the QR code.
EN 50131
Contact information
www.utcfireandsecurity.com or www.interlogix.com
For customer support, see www.utcfssecurityproducts.eu

DA: Installations vejledning

nom.)
Beskrivelse
tidsstyret relækort ATS1811 indeholder otte 1-pols
x
Et 8
relæer med tilslutningsterminaler til fælles (C — Common),
normalt åbne (NO — Normally open) og normalt lukkede (NC
— Normally closed) kontakter.
Relækontakterne er dimensioneret til 1 A @ 0 til 30 V
faldende til 300 mA @ 48 V .
Relækort kan forbindes sammen og give op til 16 relæer, når
de tilsluttes til et DGP, 64 relæer i et ATS1260 4-elevators
DGP eller 255 relæer, når de tilsluttes til ATS-centralenheden.
For hvert relæ er der en LED, der angiver, om relæet er
aktiveret.
Montering af enheden
•
ATS Master-centralenhed eller 4-dørs/4-elevators DGP:
Afhængig af ATS kabinettet og det anvendte batteri, kan
ATS1811 monteres i ATS kabinettet eller i et særskilt
kabinet. Tilsluttes via det medfølgende kabel.
• Alle DGP'er med 8-32 zoner: Op til to ATS1811'er kan
monteres på eksisterende støtteben i alle DGP'er med 8-
32 zoner, afhængigt af hvilke andre kort der er monteret.
Bemærk: ATS1811 er en printplade i størrelse "BB".
Tabel 1: Maks. 8
Enhed
ATS Master centralenheder
DGP'er (alle versioner)
4-dørs DGP (ATS1250)
4-elevators DGP (ATS1260)
Bemærk: Tidsstyret relæ/open collector-kort og 4
kan ikke bruges sammen på den samme enhed.
EN 50131-1 System requirements
EN 50131-3 Control and indicating equipment
Security Grade 3, Environmental class II
Tested and certified by Telefication B.V.
UTC Fire & Security hereby declares that this
device is in compliance with the applicable
requirements and provisions of the Directive
2014/30/EU and/or 2014/35/EU. For more
information see www.utcfireandsecurity.com or
www.interlogix.com.
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated
collection points. For more information see:
www.recyclethis.info
relæmoduler pr. ATS-enhed
x
Maks. antal
kort
32
2
32
32
P/N 1077859 (ML) • REV B • ISS 30MAY19
Maks. brugbare
kort
255
16
59
255
relækort
x