Interlogix ATS1840 Installation

ATS1840 Fuse Board Installation Sheet
EN DE FR
(1)
(3)
EN: Installation Sheet
Description
ATS1840 is an 8-way fuse board to provide for separate fused
power supply outputs. Fuse fail is indicated by a dedicated
output that can be connected directly to any zone on the ATS
control panel (or ATS1201 DGP).
Figure
Item Description Function
(1) Mains fail Connected to zone input on control panel or
detection DGP.
When no fuse fail present output equals
standard end-of-line resistor value (4.7 kΩ).
In case of fuse fail present output equals
double end-of-line resistor value (9.4 kΩ).
(2) Power supply Connected to (auxilliary) power output from
input control panel or DGP.
(3) Earth tab Connected to system earth
(4) Fuses Fuses to provide for fused power supply
outputs
(5) Power supply 8 power supply outputs, separately fused.
outputs
© 2019 UTC Fire & Security Americas Corporation, Inc.
(2)
(4)
(5)
Mounting
The ATS1840 can be mounted into any ATS control panel or
ATS1201 DGP using the spacers provided.
To mount ATS1840 into the Advisor Master control panel
or ATS1201 DGP:
1. Place the clips in the square holes (4) (use metal pillars
when available).
2. Mount the ATS1840 using screws.
Connecting the ATS1840
1. Connect (auxiliary) power supply from the control panel or
DGP to "+12 V" and "0 V" (J3).
2. Connect "OUT" and "C" (J3) to a zone input on the control
panel/DGP. "C" needs to be connected to "C" of the zone
input.
3. Connect required fused power supply to power supply
outputs 1 to 8 (J1/J2).
Specifications
Power supply
Supply power in (J3)
Supply power out (J1, J2)
Max. output current per output
ATS1840 current consumption
Environmental
Dimensions
Weight
Operating temperature
Humidity
Fuses
F1–F8
Fuse fail output
* The sum of all output currents is restricted by the auxiliary fuse of
the control panel and the local requirements for the system load.
Regulatory information
Manufacturer PLACED ON THE MARKET BY:
UTC Fire & Security Americas Corporation, Inc.
3211 Progress Drive, Lincolnton, NC, 28092, USA
AUTHORIZED EU REPRESENTATIVE:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
1 / 4
Nominal 13.8 V
Nominal 13.8 V
315 mA*
3 mA
90 x 80 x 20 mm
125 g
−10 to +55°C
< 95% noncondensing
315 mA, fast 20x5
4.7 kΩ (no fuse fail)
9.4 kΩ (fuse fail)
P/N 1077862 (ML) • REV B • ISS 09JUL19