Ohmex VCL 1508 Gebrauchsanleitung Seite 52

EN
Always keep the filtering systems clean and efficient to guarantee the appliance
optimal functioning.
• Connect the power plug to the power socket making sure that the mains power corresponds
to the one indicated on the appliance data label.
• Press the ON/OFF switch to start the appliance (12).
• Move the power regulator (17a) to adjust the aspiration power as desired.
• Disconnect the power plug from the power socket at the end of use.
• Rewind the power cord by pressing the appropriate button (11).
Accompany the cable with your hand during the rewind to prevent it from twisting
around itself.
• Store the appliance in horizontal or vertical (to reduce its footprint) position.
If desired, hook the multi-functional brush (21) to its appropriate slot (10) in the motor
body rear part when it's connected to the telescopic extension (20).
To prevent the appliance from overheating, check that there are no air aspiration
problems (example: the flexible hose, the telescopic extension or the accessory
are clogged) or that the dust container (4) is not full beyond the "MAX" level
(Fig. F15)
If the appliance stops working, turn it off and wait at least 10 minutes.
If the ON/OFF switch is not pressed the safety thermostat doesn't reboot (even if
the appliance has cooled down).
Always make sure that the filtering systems are dry before the appliance
reassembling. To let the filters dry in the open air for at least 24 hours after their
cleaning is advised.
46
USE
(Fig. F11)
VCL 1508
(Fig. F12)
(Fig. F13)
(Fig. F14)
.