General Instructions - HELIX C ONE Bedienungsanleitung

Congratulations!
Dear Customer,
and high-qual ity HELIX product.
manufacturing and state-of-the-art technology.

General instructions

General installation instructions for HELIX
components
read this manual carefully and follow all installation
instructions. This product has been checked for
proper function prior to shipping and is guaranteed
against manufacturing defects.
Before starting your installation, disconnect the
battery's negative terminal to prevent damage
we strongly recommend to get this product installed
by an authorized HELIX dealer.
air circulation for proper cooling of the equipment.
surface using proper mounting hardware. Before
behind the proposed installation location to ensure
that there are no electrical cables or components,
hydraulic brake lines or any part of the fuel tank lo-
cated behind the mounting surface. Failure to do so
may result in unpredictable damage to these com-
16
We wish you many hours of enjoyment with your
Yours,
AUDIOTEC FISCHER Team
General instruction for connecting the HELIX
connected to the chassis ground. Any other system
For a proper
current input of the car audio system.
cross-section for the connection of the HELIX
C ONE. The fuses may only be replaced by iden-
tically rated fuses (3 x 30 A) to avoid damage of
any possible damage to the wire harness. All
cabling should be protected against possible
cables close to potential noise sources such as
electric motors, high power accessories and other
-
-