General description
The U-3003-E Ultrasonic Nebulizer uses an ultrasonic transducer to
nebulize the liquid in the sterile nebulizing chamber using a contact liquid
in the transducer head to produce tiny aerosol particles.
As a result, a dense aerosol mist is produced which is propelled to the
patient in a filtered airflow through disposable hoses. Please note the
application instructions specified below.
Advantages of the system:
Alveolar accessible particle sizes of
1 to 5 µm (45%) and 1 to 7 µm (65%)
(statistics for mist/air level 3)
There are no parts requiring sterilization in an autoclave
No contact with the patient
Sterile nebulization with reduced amount of disposable material
Application Instructions:
Due to the particle size giving good alveolar access, special attention must
be given to hygiene when preparing and performing the inhalation
procedure.
Important: To ensure that the airflow is properly filtered, use a suitable
bacteria filter (11) (see figure layout diagram on page 7).
page 6
HINT