Technical Data; Environment And Recycling - Stramatel FRC AD Technische Daten - Montageanleitung

Outdoor
Recommendations
Thank you for choosing a STRAMATEL scoreboard!
We hope that you will be fully satisfied with our product. For any information, please do not hesitate to contact us.
In order to install the scoreboard set correctly, we recommend that the instructions indicated are followed correctly, and that the
material supplied by STRAMATEL is used correctly without any alteration.
However, if extra information is required, please contact Stramatel technical service with the model reference and serial number (on
the sticker under the control console).
Any alteration made to the equipment delivered may deteriorate it and result in the cancelling of the warranty.
Caution: Installation must be performed by qualified staff and must comply with IEC 364 and national wiring regulations.

Technical data

Equipment for outdoor use.
The control console should be protected against bad weather conditions (during the operation but also when the scoreboard is not in use).
Use a soft dry cloth to clean the equipment.
Scoreboard
Class I equipment – Must be connected to earth.
Dimensions 3000 x 2058 x 90 mm
(M1: 3000x750mm / M2: 3000x550mm / M3: 3000x750mm)
Weight 121 kg (M1: 45 kg / M2: 34 kg / M3: 42 kg)
Power supply 100-240V 50/60Hz 4,45-1,85A
Power consumed 445VA (max)
Control console
Dimensions 340 x 175 x 60 mm
Weight 790 g
Transmission frequency 863 - 870 MHz
Power supply 100-240V 50/60Hz / 12Vdc 500mA
Internal batteries NIMH 5x1,2V 1300mAh (22 hours autonomy)
Use only power supply and batteries supplied by STRAMATEL.
Control console recharge: turn off and disconnect the USB keyboard. Plug the power supply into the back of the control console, then
plug it into an appropriate mains outlet (the socket should be as close as possible to the control console and must be easily accessible).
Leave the control console under constant recharge when not in use.

Environment and recycling

Please help us to protect the environment by disposing of the packaging in accordance with the national regulations for waste processing.
Recycling of obsolete appliances: appliances with this label must not be disposed off with the general waste. They must be
collected separately and disposed off according to local regulations.
ZI de Bel Air 44850 LE CELLIER FRANCE
IA452FRCAD-IM_F - Installation FRCAD
stramatel@stramatel.com Tél. +33 (0)2 40 25 46 90
Page 3