HBM WE2111 Bedienungsanleitung Seite 23

WE2111

Press the
ZErO is displayed. This completes the zero balance.
 Press the
SPAN is displayed.
 Press the
The currently measured value is displayed. The dis-
play flashes to allow you to enter the weight to be
used.

Use the
used, in this case 10 kg.

Load the weigher with 10 kg and press the
S in P (scaling in progress) is displayed while the zero
balance is being performed. 10.00 flashes in the dis-
play when balancing has been completed.
 Press the
 Press the
the settings.
The display alternates between SAviNG, the firmware
version (for example P60c) and the calibration coun-
ter (for example C00008) before the current measured
value appears.
The WE2111 is now ready for measurements and able to
perform weighing processes.
key.
key.
key.
and keys to specify the weight being
key to exit the menu.
key and hold it for several seconds to save
A3603-2.0
Quick start
key.
23