Operation; Maintenance - OHAUS Scout SKX-Serie Bedienungsanleitung

3. OPERATION

3.1 Overview of Display, Home Screen
Button
Functions:
Button
Short Press
Long Press
Short Press
(Menu
Function)
3.2 Menu Structure
Cal
Span
Lin
End
3.3 Using the Balance
Note: Before using any application, be sure the balance has been leveled and calibrated.
Weighing Application
1. If required, place an empty container on the pan and press Tare.
2. Add sample to the pan or container. The display shows the weight of the sample.

4. MAINTENANCE

4.1 Cleaning
The exterior surfaces of the instrument may be cleaned with a cloth dampened with water and a mild detergent.
Downloaded from www.Manualslib.com
Zero/On
Turns the balance on; Initiates print
If balance is On, sets
Zero
Off
Turns the balance Off Changes the
weighing unit
Yes
Accepts the current Advances to the
setting next menu or
setting
Setup Mode
Reset Reset
Filter Weighing
AZT Density
StableRange Mole Weighing
Backlight
Auto Tare
Auto Off
End End
WARNING: Electric Shock Hazard. Disconnect the equipment from the power supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention: Do not use solvents, harsh chemicals, ammonia or abrasive cleaning agents.
manuals search engine
Print Function
Initiates an
application mode
Units Mode
Changes the
application mode
No Back
Moves to previous
menu item
Unit End
Reset
g
kg
oz
lb:oz
lb
N
End
EN-3
Tare
Tare
Menu
Enters the User
menu
Exit
Exits the User menu