Details Of The Button Panel; Pump 1, Pump 2, Light - Teuco 630 Gebrauchsanweisung

EN

DETAILS OF THE BUTTON PANEL

Pump 1 - ON/OFF key of massages operated
through the pump 1.
PUMP 1
Press the "Pump 1" button to activate the relative
massage seats. Press "Pump 1" a second time to cut
short the massage session.
The length of a whirlpool massage session can
be programmed: see SETTING THE DURATION.
PUMP 2
Press the "Pump 2" button to activate the relative
massage seats. Press "Pump 2" a second time to
cut short the massage session.
The length of a whirlpool massage session can
be programmed: see SETTING THE DURATION.
LIGHT
Press the "Light" button to switch on the chromo
experience function inside the minipool.
The indicator light will also switch on.
The chromotherapy will start to function, rotating the
colours at approximately 10-second intervals.
The colours are: White - Pink - Red - Orange -
Yellow - green - Cyan - Blue - Purple.
If you wish to select fixed lighting in the required
colour and for an unspecified period of time, switch
the light off and then on again (within 2 seconds)
while it is the required colour.
Press the "Light" button again to switch off the
chromo experience.
38
Pump 2 - ON/OFF key of massages operated
through the pump 2.
Light -
Chromo experience
ON/OFF button.
630