Pressure Adjustment - EINHELL DSP 15 Bedienungsanleitung

GB
Nozzles with a cone spray pattern (A) are best for
treating shrubs, trees etc. (three-dimensional
distribution). Nozzles with a flat spray pattern (B) are
recommended for treating surfaces (two-dimensional
distribution).
The spray tube is fastened in place by tightening
the union nut on the pistol grip.
Spraying pressure can be adjusted in the range
from approximately 1 to 4 bar (see „Pressure
adjustment") in order to control the distribution
rate and droplet size.

3. Pressure adjustment

The pressure setting has to be adjusted before filling
in the pesticide etc. To do so, twist the adjusting cap
(A) over the markings on the pressure tank.
8
A
A
B
A