Troubleshooting; Maintenance - RIBA RCP-10 Handbuch

Troubleshooting:

Problem:
Weight display is not illuminated:
The weight display changes continually:
The weighing result is obviously incorrect:

Maintenance:

Please disconnect the device from the operating voltage before cleaning.
Only use a cloth dampened with mild suds and not aggressive cleaning agents (solvents or similar).
Please ensure that fluids are not able to get into the device and rub off using a clean, soft cloth.
Loose sample residue/powder can be removed carefully using a brush or hand vacuum cleaner.
The operating company shall ensure that load-bearing components are checked by a competent
person (your supplier) at maximum intervals of one year.
© RIBA WEEGTECHNIEK BV
Solution:
* The battery is empty.
* The balance is not switched on.
* The mains supply connection has been interrupted
(mains cable not plugged in/faulty).
* Power supply interrupted.
* Draught/air movement.
* Table/floor vibrations.
* The weighing plate is in contact with foreign matter.
* Electromagnetic fields / static charging (choose
different locations/switch off interfering device if
possible).
* The balance display is not set to zero.
* Adjustment is no longer correct.
* Great fluctuations in temperature.
* Electromagnetic fields / static charging.
21