RIBA RCP-10 Handbuch Seite 23

Using the backlight, yes or no:
You can work with or without backlight, remember that backlight will decrease the operating
time from the battery.
* Switch On the scale and wait for standby
* Press NET/GROSS key and ON/ZERO
* In the display appears AoF xx
* Press tare Key, display shows bL on/off
* Choose on or off with ON/ZERO key
* Press 2 times TARE to confirm the setting
Counting function:
* Count 10 - 20 - 50 - 100 or 200 units for reference
* Put this on the scaleplatform
* Press UNITS key to activate Countingfunction
* Choose the scale-reference with NET/GROSS key
* Press UNITS key to confirm, after 3 sec. the display shows the piece-units
* You can add more or less units, the display shows the pieces,
© RIBA WEEGTECHNIEK BV 20