Werbung
Verfügbare Sprachen
Verfügbare Sprachen
A
G
F
J
J
E
D
2
Use the laser receiver CRX 40 for levelling over longer distances or when the laser lines
are no longer visible. Switch on with button F. The central area (I) and acoustic signal (G)
LEDs light up and a signal sounds.
Line lasers:
CRX 40:
Set the line laser to hand receiver mode. The laser lines will now pulsate with high
frequency, making the laser lines darker. The laser receiver can detect these pulsating
laser lines up to a maximum distance of 40 m.
Now move the receiver field (B) of the laser receiver through the laser lines upwards and
downwards (horizontal laser line) and/or sideways (vertical laser line) until the centre
LED lights up. Now mark the horizontal and/or vertical reference dimension.
!
Minimum distance from the laser device about 3 m. Pay attention that the laser
lines are not reflected by reflective surfaces. Such reflections can lead to false
indications.
I
H
B
C
Working with the laser receiver
This button switches hand receiver mode on and off.
The sensitivity of the central area can be adjusted
using the button.
CombiRangeXtender 40
A Sound ON / OFF
B Receiver field for
laser beam
C Universal mount
D Battery compartment
E
LED's for laserindication
(front, backside)
F
ON / OFF switch
G LED acoustic signal
H Central area switchover
I
LED central area:
green = small
red = large
J
Head / side magnets
07
EN
Werbung
