SATA 03075 Bedienungsanleitung Seite 48

2. AC voltage measurement
Range
600.00Mv
6.0000V
60.000V
600.00V
1000.0V
LoZ/1000~V
V.F.C600V/1000V
Input impedance: About 10MΩ.
Display: True RMS; accuracy guarantee range: 10~100% of range (20~100% for range of 1000V); in case of input short circuit, less than 50
characters may be allowed for residual reading.
AC crest factor: 3.0 for full scale (excluding the range of 750V for which the factor is 1.5 for full scale)
Nonsinusoidal waveform: The accuracy for crest factor of 1.0~2.0 must be increased by 3.0%.
The accuracy for crest factor of 2.0~2.5 must be increased by 5.0%.
The accuracy for crest factor of 2.5~3.0 must be increased by 7.0%.
3. DC measurement
- 48 -
03075/03079
Resolution
45Hz-1kHz
10μV
100μV
±(0.4%+40)
1mV
10mV
100mV ±(0.6%+40)
0.1V
0.01V/0.1V
Accuracy, ± (a%reading + b number of characters)
>1kHz-10khz
±(5.0%+40)
±(1.2%+40)
±(1.2%+40)
±(3.0%+40)
±(3.5%+40)
±(2%+40)
±±(4%+40)（frequency response：45~400Hz）
EN DE RU KO PT
>1kHz-20khz >20kHz-100kHz
±(5.5%+40) ±(8.0%+40)
±(3.0%+40) ±(8.0%+40)
±(3.0%+40) ±(6.0%+40)
Unspecified
JA ES