SATA 03075 Bedienungsanleitung Seite 36

EN DE RU KO PT JA ES
03075/03079
Keys:
* RANGE: Click it to change the range mode from Auto to Manual. At that time, the "Auto" prompt on LCD will disappear. Each click will increase the
range by one position. When the maximum range is reached, click the key to jump to the minimum range. This process occurs in cycles. Press
and hold this key for not less than 2 s or turn the selector knob to deactivate the manual range mode. (Only for the following functions: V, Ω, I,
Freq Cap, Loz)
* STORE: Press this key to store a data unit. At that time, "STO" will flash on LCD; press and hold this key to enter the automatic storage and setup
menu. In the automatic storage and setup menu, when "SET.1" ("SET:INTERVAL" for 03079 model) appears on the auxiliary display, the function of
setting automatic storage interval ((1-240)s) is activated. In that case, press "HOLD" to deactivate the setup function; and press "SELECT" to enter
the next page. When "SET.2" ("SET:DURATION" for 03079 model) appears on the auxiliary display, the function of setting automatic storage duration
in minute is activated. In that case, press "HOLD" to return to "SET.1" ("SET:INTERVAL" for 03079 model) page, and press "SELECT" to activate the
automatic recording function as per the set parameters. During automatic recording, press "HOLD/Esc" to exit from the automatic storage page.
Note: During automatic storage, the automatic storage function shall be deactivated by pressing "HOLD" or turning the knob to a position rather
than "OFF". Do not turn the knob to "OFF" position when the automatic storage function is not deactivated, for fear of data loss.
* RECALL: Press this key to activate the recall mode. At that time, the prompt "RCL" ("VIEW" for 03079 model) will appear on LCD. In recall mode,
the serial number of the current data is shown on LCD. Press "REL" or "HZ" to recall a data unit forward or backward. And press and hold "REL" or "HZ"
to locate the data to be recalled forward or backward quickly. Press "RANGE" to delete the current data, and press "HOLD" to deactivate the recall
mode. To delete all data, please select and perform DEL function (FORMAT for 03079 model) from the system setup menu.
* MAX/AVG/MIN/Peak hold: Press "MAX MIN" to enter the manual range data recording mode. At that time, the automatic power-off function will
be canceled, "MAX" prompt will be shown on LCD, and maximum value ("MAX") will be shown on the auxiliary display. Next, click "MAX MIN" again,
then "AVG" prompt will be shown on LCD, and average value ("AVG") will be shown on the auxiliary display; afterwards click "MAX MIN" again, then
- 36 -