Stihl FUNCTION BASIC Gebrauchsanleitung Seite 9

Service life
The helmet should not be used for more than four years from the date
of manufacture printed on it (see date dial in the helmet shell) and it
should not be used for more than 3,500 hours from the date of first use.
It is important to replace the helmet in good time. The helmet begins
:
to age with the first day of use. Please note the label with the
indication "date of issue".
Note the date of first use on the label inside the helmet with a
:
permanent marker.
Accessories and spare parts
– Helmet inclusive interior: 0000-889-9023
– Rain veil: 0000 889 8004
– Chin strap: 0000 889 8003
Always use original STIHL parts.
:
Certification
– The helmet complies with the following Standard: EN 397:2012,
NBR 8221
– EC conformity mark: CE
– Manufacturer/distributor: STIHL
– Model: FUNCTION Basic
– Adjustable head size: 53 cm to 66 cm
– Shell material: HDPE (high density polyethylene)
– Headband material: LDPE (low density polyethylene)
– Suitable for low temperatures down to - 30 °C.
1
Adjusting the hard hat
Put on hard hat with the peak to the front.
:
To alter the size, adjust the strap at the back of the hat to the
:
required size with the aid of the locking pins, (Illustration A). The
helmet must sit comfortably but securely on your head and must not
slip off when you bend forward.
To adjust the wearing height to ensure a position which is
:
2
1 Month dial
The month dial indicates the
month of manufacture.
2 Year dial
The year dial indicates the year
of manufacture.
G
9