Stihl FUNCTION BASIC Gebrauchsanleitung Seite 7

For users operating chain saws and power tools
This instruction manual is for the following hard hat models: STIHL
FUNCTION BASIC.
Read this Instruction Manual through carefully and keep all the product
information in a safe place so that you can refer to it at any time. This
product is in compliance with the PPE Regulation (EU) 2016/425 and
other appropriate directives to fulfil the requirements of CE marking.
The complete Declaration of Conformity is available at the following
internet address: www.stihl.com/conformity.
For traceability of manufacturing batch, see date clock on the inside of
the helmet shell.
Test institute: PZT GmbH, Bismarckstrasse 264 B, 26389
Wilhelmshaven, Germany
Notified body number:1974, Notified by: DAkkS
This product is intended to protect the wearer from impacts to the head.
To ensure the best possible level of protection and comfort when using
this hard hat, it is essential to read and observe the following
information. The hard hat is designed for use when working with chain
saws (e.g. timber harvesting). The level of protection in other
applications cannot be predicted.
WARNING! For adequate protection this helmet must fit the user's head
correctly and be adjusted to the size of the user's head. The helmet is
designed to absorb the energy of a blow by partial destruction or
damaging to the shell and the harness, and even if this damage is not
easily visible, a helmet that has been subjected to a severe blow must
be replaced.The user is also advised of the hazards that may result from
modification or removal of an original component of the helmet if not
recommended by the helmet manufacturer. Helmets should not be
adapted for the purpose of fitting attachments in any way not
recommended by the helmet manufacturer. Do not apply paint,
solvents, adhesives or self-adhesive labels, except in accordance with
instructions from the helmet manufacturer.
Important Points
No personal protective equipment can provide absolute protection
against injury. The degree of protection depends on many factors. This
hard hat and its components are no substitute for a safe working
technique. Improper use of a power tool can result in accidents.
It is therefore essential to observe the safety regulations issued by
:
the authorities concerned (employer's liability insurance
associations, etc.) and the safety instructions in the Instruction
Manual of the power tool being used.
Check the hard hat and its components every time before use to
:
make sure they are in perfect condition (e.g. visual condition).
G
7